Your home keeps working when the internet doesn't.
Smart switches, sensors and power meters that talk to each other over your own Wi-Fi and cables. Built on ESP32 by Hexacue, set up for your home, delivered across Lebanon.
- Cash on delivery or Whish
- 6-month warranty
- Delivered across Lebanon
What would you like to do?
Control my home
Lights, AC, curtains, water heater and alarms from one app, with schedules that keep running offline.
Kits from $149Start with a kit
Cut my power bill
See what EDL, the generator and your solar each cost you, and switch off heavy loads automatically.
From $139Work out my bill
Teach with it
ESP32 learning kits with offline lessons, from a first circuit to a working smart-home model.
From $39For schools
On sale now
Limited stock at these prices.
What customers are buying
Shop the parts and the devices
What does your electricity really cost?
Know what every kWh costs you: EDL, generator and solar
Most homes pay for power three ways and only see the total. We meter each source, read your solar inverter locally, and show the real cost of each kWh, so you know where the money goes and what solar saves.
You enter your own EDL and generator rates, including per-amp subscriptions.
A DIN meter on EDL and one on the generator line record exactly what each supplies, in both directions. Check the generator bill against what you really used.
The solar gateway connects to the inverter's RS485 or CAN port and the battery BMS: production, battery %, grid and load, every few seconds, with no inverter cloud app.
Enter your EDL and generator rates and Home Assistant Green shows the daily and monthly cost of each, what solar saved, and which circuits use the most.
Metering breakers switch off the water heater or AC when the generator takes over or the battery runs low, and turn them back on when solar is strong.
Works with hybrid inverters that have an RS485/Modbus or CAN port. Send us your inverter model and we'll confirm before you buy. Panel and DC wiring must be done by a qualified electrician; our installers can do it.
Home kits, ready to plug in
Every kit ships configured for Home Assistant and the Hexacue app. Unbox, power on, and the devices find each other.
Tell us what you need. We'll list what it takes.
Home Assistant Green: one box for every protocol
Most homes end up with devices that don't speak to each other. Green brings Wi-Fi, Zigbee, Z-Wave, Thread, Bluetooth, IR and wired LAN gear into one dashboard and one set of automations, running locally.
ESP32 Wi-Fi devices, Zigbee sensors, Z-Wave locks and Matter bulbs from different brands appear side by side. One automation can use them all: a Zigbee door sensor turns on a Wi-Fi light and pauses the TV.
Split ACs through IR, water heaters and pumps through relays, and washing machines, fridges or ovens through energy-metering plugs or their own local integrations. Get alerts when a load finishes or runs too long on generator power.
Smart TVs, AV receivers, streamers and multi-room speakers from major brands can be controlled over the LAN. Older projectors, amplifiers and screens connect through our ESP32 AV bridge using IR, RS-232 or relays. One "Movie" scene dims the lights, lowers the screen and switches the input.
Green runs on your LAN with no subscription. Remote access is optional and off unless you turn it on.
Not every appliance or TV exposes local control; a few brands only work through their cloud. Send us your models and we'll confirm before you buy.
One gateway, every battery sensor in the house
Zigbee sensors sleep between readings, so a coin cell lasts one to two years. Mains-powered switches, plugs and bulbs relay the signal, so the network gets stronger with every device you add and reaches through concrete walls that stop Wi-Fi.
| Devices per gateway | Up to 200 |
|---|---|
| Runs without internet | Yes, fully local |
| Connects over | Ethernet, Wi-Fi or PoE |
| Works with | ZHA, Zigbee2MQTT, Hexacue app |
Already running Home Assistant? Home Assistant Green with a Connect ZBT-2 works as your Zigbee hub too.
Everything talks over your own network
- Wi-Fi for devices
Switches, sensors and plugs join your router like any phone. No hub needed for Wi-Fi-only setups: each device serves its own local web page.
- LAN for the core
Controllers, gateways and relay panels connect by Ethernet, so the heart of the system doesn't depend on Wi-Fi.
- Zero cloud
Automations run on the local controller. When the internet or the ISP goes down, lights, alarms and schedules keep working.
Videos and guides for every system we sell
Free for customers and students. Every video and guide also ships on the teacher USB and can be saved to your own network, so learning never needs the internet.
How it works
- 1Tell us about your home
Use the planner, or send a photo of your electrical panel on WhatsApp. We reply with a parts list and a price.
- 2We prepare and deliver it
Every device arrives flashed, named and paired. Pay cash on delivery or by Whish. Installation is available.
- 3It runs on your own network
No cloud account and no subscription. If the internet drops, your switches, schedules and alerts keep working.
Works with what you already run
All firmware is open ESPHome YAML and runs without any cloud service. If you'd rather write your own in Arduino or ESP-IDF, the boards in our catalog expose every GPIO on 2.54 mm headers. Voice assistants like Alexa and Google Home need the internet, so we leave them optional.
Before you order
Still unsure? Message us on WhatsApp or email info@hexacue.net.
Does it really work without internet?
Yes. Devices talk to each other and to Home Assistant Green over your own Wi-Fi and LAN. Switches, sensors, schedules and the dashboard keep working when the internet is down. Internet is only needed if you want to control things from outside the house.
Can it switch my water heater, pump or AC?
Yes, through a contactor. Our rule: anything that draws more than 4 A (water heaters, pumps, AC units) is switched by a 25 A contactor or a solid state relay, and the smart relay only gives the signal. The solution builder adds them for you, and our installers wire them in the panel.
How do I pay?
Cash on delivery, in USD, to our driver or Whish Money, using the number and order reference shown after checkout.
How long does delivery take, and what does it cost?
You see the expected delivery date at checkout and in your invoice email; it depends on your city. Delivery costs $5 and is free on orders over $100.
Can you install and set it up for me?
Yes. Tell us what you need with Build your solution and we will call you to plan the system and quote installation. Solar panel and DC wiring is always done by a qualified electrician.
Will it work with my solar inverter?
Most hybrid inverters with an RS485/Modbus or CAN port work with our solar gateway. Send us your inverter model and we will confirm before you buy.
Is there a warranty?
6-month warranty. Contact us with your order number and we will take care of it.
Do you work with schools?
Yes. Choose "Business or school" at checkout to get an invoice in the school's name with its VAT number, or request a quote for a full classroom set. Verified schools and businesses get a discount on every order.
Where is my order?
Open the link in your confirmation email, or track it with your order number and phone.
From the Hexacue integration team
Hexacue designs and installs technology systems for homes, schools and businesses. The same engineers choose, prepare and support everything in this store.
Send us a photo of your panel- Works without internetEverything runs on your Wi-Fi and LAN. The internet is only for remote access.
- Open, no lock-inESPHome firmware and Home Assistant. You own the system and can change it later.
- 6-month warrantyClaim on WhatsApp with your order number. Many issues are fixed remotely. What's covered
- Installation availableOur team wires panels, breakers and solar connections, or guides your electrician.
